carl
PA Lieutenant
Posts: 84
|
Post by carl on Jul 12, 2006 17:27:04 GMT
I tried to post this yesterday but must have done something wrong. I've been searching all the material sent to me by Prince August and The Dunken Company here in the USA and there appears to be no moulds for Tanks, Jeeps, Trucks, Planes, Arteliary, etc. Mostly for WW2 setups. Difficult to have a WW2 setup complete without mobile equipment. I have one metal plane mould for a Bomber. However, really could use Jeeps, pesonal carriers, long range cannons such as Howitzers, small trucks and any other mobile type euipment. Don't see how there can be so many moulds for modern armys and no modern equipment.
|
|
|
Post by spacenut on Nov 12, 2010 13:17:41 GMT
Tanks would be cool.
|
|
stand2
PA Lieutenant
Posts: 83
|
Post by stand2 on Dec 16, 2010 13:28:50 GMT
ANY NEW MOULDS WILL BE COOL
|
|
|
Post by Prince August on Dec 21, 2010 13:56:32 GMT
Vehicle moulds are problematic as if they require assembly they must cast extremely accurately, and with drop casting that is not always easy. While we can spin cast accurately, that is no help for customers. With customers aged 6 to 96 (or above) having large vehicles as moulds is not gonna happen. However I have mentioned small ones (15mm scale) that might be possible. There are issues with metal shrinkage if cast in one piece. but perhaps there are ways around this. I will mention it to Lars again.
|
|